Plate water pump, industrial pump, water supply pump, water supply, fire pump

plate pump

characteristic	amount
power	One to three horsepower
debi	(bar)3
mechanism	Single or double propeller

plate pump

Overview

CAM 200

Plate water pump is a type of centrifugal pump and is used to transfer fluids with low viscosity such as water. In fact, the mechanical energy produced by the electric motor is transferred to the pump impeller through the shaft and causes the impeller to rotate and generate kinetic energy in the fluid. Finally, the fluid comes out of the pump opening with pressure and is pumped to the consumer.

The plate water pump is one of the most widely used domestic water pumps, which is used more today due to its significant capabilities and features. And in general, this pump has better performance and less noise than the jet water pump.

The plate pump is produced in powers and powers of one to three horsepower, and in terms of appearance, part of it is circular and plate-shaped. As we said, the plate water pump is suitable for any application that has low viscosity liquids. The meaning of viscosity in fluid mechanics is the level of resistance of a liquid against flowing, and whatever this viscosity is, it is also called viscosity; is less, the resistance of the liquid against the flow is less, so it requires less force to pump the liquid. A plate pump is a device that pumps liquids with low viscosity well

Features and applications

Among the types of pumps, plate, jet and solar water pumps have the least noise.
In fact, the plate water pump works by transferring the rotational energy of one or more rotors.
By using this device, you can transfer all kinds of liquids with low viscosity, such as all kinds of solvents, water, chemicals, light oils, etc.
These pumps are generally suitable for low pressure, high capacity and pumping liquids with viscosity between 0.1 and 200 cP.

Plate water pump performance

In fact, it can be said that this is the main component Water supply system, its propeller, which includes some curved holes. The propellers of these systems are usually located between two discs. The water flow in its axis enters these propellers and exits through the edges of the propellers while rotating. It should be noted that the propeller on the other side is connected to the engine by a drive shaft and is rotated at a high speed. This rotational movement causes the liquid to accelerate through the edge of the impeller inside the water pump and quickly exit it.

Single impeller plate pump

As the name suggests, the single impeller plate water pump has an impeller and a type of centrifugal pump. This type of pump is cheaper due to having one less impeller than the two impeller model and has less pumping power compared to the two impeller model. The flow rate and head that can be provided by a single impeller plate pump is less. The mechanism of the single impeller plate pump is in such a way that the fluid enters the part where the impeller is moving and by applying centrifugal force on it, it exits in the specified direction. Characteristics such as the pressure and speed of the liquid are affected by the performance of the impeller and it increases accordingly, so the desired fluid is directed to the outside of the pump and exits from it.

Double impeller plate pump

This type of plate pump has two impellers and can provide more flow rate and head, and as a result, it pumps a much larger volume of fluid. The increase in pumping power in the two-propeller model allows it to be used for a variety of industrial and general applications. If the number of floors and units of a building is large, it is better to use a water pump with two impellers. Due to the high pumping power in the two-propeller plate pump, it produces more noise pollution and has a higher price.