Lubi centrifugal pump, industrial pump, water supply pump, water supply, fire pump

Fire fighting centrifugal pump, fire fighting, fire fighting, fire fighting, types of pumps, industrial pumps, types of industrial pumps, buying fire fighting pumps

Centrifugal lobe pump, all kinds of industrial pumps, fire fighting equipment, centrifugal pump, water supply pump

Centrifugal fire pump (Flbs Series)

Imen Datis Asia » Shop » Centrifugal fire pump (Flbs Series)

characteristic	amount
Head	5.50 to 14.2 times
Speed range	2900 ، 3000 rpm
Exit range	50 to 1000 USGPM

Overview

Investigation of centrifugal pump of lubi fire department

What is a lubi centrifugal pump?

If the incoming fluid is turbulent, it will cause damage to the propellers, as well as a decrease in the flow rate, and ultimately consumer protests.

Centrifugal fire pump is a type of pump that is used to create pressure and transfer water to fire areas to fight fires. These pumps are mainly used in stations or fire fighting devices as well as various residential and industrial places and have the task of supplying water with sufficient pressure around the fire. This case has been resolved in Lubi pumps by changing the type of propellers and making them official.

Conventional sprinklers are generally used in routine or high-risk applications. In this position, they create a spherical water discharge pattern with approximately half of the spray directed upwards and the other half downwards.

Imen Datis Asia is a supplier of all types of fire pumps, fire alarm equipment and water pumps.

The installation of these types of pumps guarantees the safety of people, buildings and equipment. The booster of FLBS fire pumps for installation must be in a condition where the water tank has positive pressure compared to the pump. There is no difference between diesel and electric engines. This type of design makes it very easy to inspect, repair and maintain the booster pump without damaging the pipes.

Application of the product

The benefits of the centrifugal fire pump

Centrifugal pumps with radial flow:

Radial flow pumps work in such a way that the fluid parallel to the shaft enters the pump impeller and exits the impeller perpendicular to it. Centrifugal pumps with radial flow are usually used to create high pressures at low flow rates. Radial flow pumps are the most widely used types of pumps.

In these pumps, fluid pressure increases only by applying centrifugal force. The pumps of this category have a series of inlet impellers with a specific speed of less than 4200 and two series of suction impellers with a specific speed of less than 6000. In these pumps, the fluid usually enters the impeller through a hub and flows radially to the environment.

Centrifugal pumps with axial flow:

In axial flow centrifugal pumps, the fluid enters the pump parallel to the shaft and leaves the impeller parallel to the axis. In this pump, most of the liquid pressure is provided by the force of the impeller vanes. This pump is used to produce high flow rate with low head (High mass flow rate and low heads).

Pumps of this category, which are sometimes called propeller pumps, apply the greatest increase in fluid pressure through the use of propellers or lifting blades. This group has a series of inlet impellers with axial inlet flow and almost axial outlet. Pumps of this group often have special speeds of more than 9000. In general, axial flow pumps are used when pressure increase is necessary, and radial flow pumps are used to produce flow rate. they profit