fire box

Fire extinguishers are used to extinguish fires in residential, office, commercial buildings, factories, industrial units, etc. Imen Datis Asia’s fire boxes are very diverse in terms of color, dimensions and laser design on the box, also Imen Datis Asia produces and supplies boxes according to the customer’s taste, taking into account the standards of the firefighting organization.

1- Dry systems: this type of system is not connected to the city water pipe and its entrance is installed at the entrance of the building or the floor. Water enters the pipes by tankers and fire pumps, and its output is used in the required class. The entrance of this system is housed in a chamber outside the house or workshop building. This is the type of system where we can get the water to the closest possible point without wasting time and there is no problem when there is a fire.

2. Wet systems: This type of system is installed at the lower end of the building, that is, it is up to the top floor of the building (the roof is stretched). This type of system is connected to the city water pipe and in any case there is always water in the pipes. And water comes out of it.

Installation location of certified fire extinguisher box:

The distance between the fire boxes should be at most 30 meters so that in case of failure of each one, other fire reels can be used.

Usually, boxes are installed in corridors, corridors, footpaths and escape stairs.

• The installation height of built-in boxes should be higher than 70 cm from the floor.
• The installation height of the facing boxes should be above 130 cm from the floor.